The IDEAL "Original" Pet Door
|
 |
|
Super-Strong Thermo-Plastic Dog Door |
 |
- Inner telescoping frame that adapts to doors of 1 1/4" to 1
3/4" thickness. No need to build an inner frame
- Impact-Resistant Super-Strong Thermo-Plastic
- Clear flap allows pet to see if slide is in place
- Tamper Proof Mounting system, door can't be removed from the outside
- Simple 4-step installation
- Average install time: 20 minutes!
- Floating bottom threshold for perfect seal every time
- Limited Lifetime Warranty!
|

Choosing the correct size door for your pet is not difficult.
Remember you can always get a door which is a little bit larger, but do not get
a door which is too small. Here are some guide lines and suggestions to help.
If you have more than one pet, you will need to focus on the larger dog.
Door Sizes
and Pet Weight:
If your cat is
smaller than about 15 lbs or your dog smaller than about 8 lbs, a flap size of around
5" x 7".
If your dog is
between 8 lbs and 35 lbs consider a flap size around 8" x 11".
If your dog is
between 35 lbs and 80 lbs consider a flap size around 10" x 15".
If your dog is
over 80 lbs consider a flap size of 15” x 20”.
Exact Measurement:
1. Measure your pets width - Simply open a door the minimum width needed for
the widest part of your pet to comfortably walk through, then measure the door
opening and add an inch. You can also stand above your pet and use a ruler to
measure the widest portion of your pet, then add an inch. It is important to
add an inch or so, that way your pet will not rub on the door as you pet passes
through.
2. Determine your pets heightM – Simple measure from the top of your dogs shoulders (the
withers) to the lowest point of your dogs belly or chest, then add 2 inches. It
is important to add a couple of inches, that way your pet will not rub on the
door as you pet passes through.
Note: For installation in wall purchase of a Wall Kit is necessary.